covecube.com
community.covecube.com
blog.covecube.com
wiki.covecube.com
bitflock.com
stablebit.com
In order to better support our growing community we've set up a new more powerful forum.
The new forum is at: http://community.covecube.com
The new forum is running IP.Board and will be our primary forum from now on.
This forum is being retired, but will remain online indefinitely in order to preserve its contents. This forum is now read only.
Thank you,
Download your copy of the StableBit DrivePool, StableBit Scanner or StableBit CloudDrive here
Follow Covecube on Twitter.lee1978
About
- Username
- lee1978
- Joined
- Visits
- 142
- Last Active
- Roles
- Member
Comments
-
Yes once I put the backups back on the pool I ran the backups again with success
-
Hi this has been a problem since M3 and the cause was the fast file option. Anyway the client backups do work when there not on the pool first of all make sure all the client computers are off navigate to the client backup folder delete it all move…
-
Also just tried the new buils also haveing same problem as Smith more lited hoever there are duplicated up to 4xbut it looks like where on the right track also re-tested the client backups mine still fail at 32% if the backup folder is on the pool
-
StableBit.DrivePool_1.0.0.5410_BETA.wssx
-
Hi, I dont have a boxee box i use AcRyan just tryed the new update it still won't list all the files i belive it has something to do with the fast file listing as when i switch it off under M3 it works fine switch it on same problem as M4 plus switc…
-
Hi I can confirm I am also getting a lot of missed media files using M4 I can also confirm that the fast directory is causing it in m3 you could switch it off so it was not a problem but M4 does not have that option I have a total of about 600 file…
-
@jazTryed the xbox360 was working fine this is what i did1. Turn on the xbox2. Go to server click on start then click computer click Network right click xbox360 make sure streaming is switched on right click streaming options make sure ther server …
-
@ jaz I'll set it all up tonight and try it for you I need to know what format your media is in all mine is either m2ts or Iso which Xbox/ps3 can't run so I never botherd setting it it. Lee
-
@ jazonif you move the client backup folder off the pool it works fine and you can repair it without problems seems the pool does like the client backup folder and it was fine on M3 easy fix for alex one thing i did notice was the backup gets to ar…
-
Seem to be haveing problems with the client backups all was fine on M3 now none of my computers will backup if the client backup folder is on the pool plus for some odd reason the folder gets this added to it when i move it or recreate it to the poo…
-
Hi, Just installed the new M4 i only had 1 problem and that was with the client backups but i think i have that sorted now otherwise all is running 99% ok tho there are only 2 things i see as misssing parts1. The new Drive can not be renamed2. The p…
-
Hi I have to say guys seems like you want Alex to rush out m4 just for your peace of mind alex still responds to support messages within 24hr or less he has stated many times he is working on m4 that was 1 reason why he extended the 30 trial time go…
-
Hi Alex is working on m4 right I believe he has and is making some brilliant improvement as well as adding some if Not all the surgested adons we all wanted and a interface and a more streamlined code so please be patient
-
Hi Check to see if you have the drivepool setting turned off i had the same problem with fast/i/o and direct i/o switched on Lee
-
Hi I have not had any problems running the client backups directly from drivepool the only 1 problem i did have is when i put the direct i/o setting on and fast i/o setting for reason with these on i got a server error saying my backups were corupt …
-
HiI had a similar problem with my ACyran box's i found this command on the net and it worked for me after i had aplied a windows updateRun this command from the servernetsh intip reset c:\resetlog.txti hope it works for you all 2 Lee
-
Hi,First of all i dont think anybody will know why some of us have problems with DrivePool and some dont i am lucky and touch wood have only had a few minor problems.You could try to remove the drivepool software from your system and do a fresh inst…
-
Hi Sadly there is no function yet to re-balance to pool I had the same problem. However this is what I had to do install the rest of your new hard drives then click remove harddrive from 1 full of data it will then migrate all the data across the …
-
Yeah I have 2 64gb SSd I had 1 in my main computer and I bought 1 for the server however like u say I could not get whs11 to install on the SSd at all I even tryed a work around installed whs11 on a 160gb drive sata drive made the main server partit…
-
I found power options greatly effect transfer speed if I set the server to power save and set the Asus(mb) green utility to power save my transfer speeds will drop to around 18 to 22mb/s but if I set all to performance it jumps to 60/93mb/s sometime…
-
I have asked the same question about balancing new drives or even replaceong failing drives. Alex has mentioned that it may be a upgrade after the main release but I do feel it should be included now as more and more people require the feature this …
-
Hi, Ok I have just run a 30 min test The new star trek film in a full BD iso rip 49gig total file size Running on 5 acmini 2 boxs with 5 min intervals The film runs fine without any stutter or pause Infact the server is set to power save mode…
-
Hi I stream hd media to 5 different locations around the house at the same time with no problems at all however the number of drives you have where the data is stored will be a factor, Also server's generally perform tasks all the time so there ca…
-
Hi Follow this link for instuctions on sending in error report's http://wiki.covecube.com/StableBit_DrivePool#Troubleshooting_and_reporting_bugs Lee
-
Hi jimMay i ask why you need to partition the drive then add it to the pool by doing that it still is 1 drive as that is how the pool works makes many drives as 1 and drivepool supports 3Tb drives so there is no need to partiton it Lee
-
Nice 1 Alex my folder is now hiden by the way what would be the command to use if we ever needed to share the folder in the future. i can guess but just want to make sure in case i delete all my folders lol Lee
-
HI, I have the same problem since moveing the client backups to the pool, i now have the folder on view i have tried hideing it under folder properties but this does'nt seem to work funny thing is tho the folder is was in view when it is off the po…
-
lolYou only had the post up for 12hrs lol most support takes 24hrs at least lol chill, Alex is a cool guy he is probaly working on it right now check for updates. I have been useing this software now for 2 months and not had any major problems a fe…
-
Hi I know alex has made some changes so some degree of access is still available to us however me like some of the others here we/i are relying on dp at the moment and I am sure alex would extend the expire for us till the release of the full progr…
-
Hi I have asked a similar question for instance if you where add a new drive I would like the option to populate it with data already in the pool useful for general new drive or upgrades. Also I would like the option to spread the data of 1 drive t…