Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Sign In with Google

Our Sites

covecube.com 
community.covecube.com 
blog.covecube.com 
wiki.covecube.com 
bitflock.com 
stablebit.com 

Poll

No poll attached to this discussion.

In order to better support our growing community we've set up a new more powerful forum.


The new forum is at: http://community.covecube.com


The new forum is running IP.Board and will be our primary forum from now on.


This forum is being retired, but will remain online indefinitely in order to preserve its contents. This forum is now read only.


Thank you,

Lost ALL shares with build .1864...data is still on the drives though

edited June 2011 in DrivePool
Yesterday, I installed the .1864 beta update and discovered that the info on the 'Hard Drive Pooling' Tab was missing, so I immediately opened a support ticket. In the meantime, I decided to 'rollback' to the older version. As I have done with older versions, I removed the add-in via the WHS 2011 dashboard and rebooted. I then re-installed the previous version (beta .1836) assuming that it would rescan my drives and recreate my shares. I now have NO shares and no information on the 'Hard Drive Pooling' tab. I can see that my data is still on the drives, it just seems that DrivePool is no longer attempting to scan the drives for data.

Please help!
-e.B


Comments

  • The same with me ,  I decided alse to 'rollback' to the older version
    It did'd work for me.

    What i did was:

    • uninstall stablebit
    • open regedit
    • Find and delete folders with stablebit in reg file
    • close regedit
    • reset system
    • install stablebit 18xx
    • reset
    • enable service stablebit
    • old  'Hard Drive Pooling' folders are back,

    BUT stablebit dashboard is refreshing every sec. cannot change a thing.

     

  • Hi Guys

     I had the same trouble even after re-installing 1836 i found i had to reboot my server quite  few times then it seemed to pick up the drivepool with the new version 1864 not sure if this is a bug or not but i did get mine to work just try rebooting a few times until it pick the drives back up. 

    Hope it helps

     

    Lee

  • edited June 2011 Covecube
    1864 does require a reboot after the update:

    image

    You may want to follow these instructions to reset all the files:
    (It should be unnecessary to mess with the registry, DrivePool doesn't use it)


    I can't reproduce these issues, can someone with this issue submit error reports:


    EDIT:

    This sounds like it's purely an installation issue, your data should be unaffected.

    Thanks,
  • Covecube

    Hi Guys

     I had the same trouble even after re-installing 1836 i found i had to reboot my server quite  few times ...
    Can you submit your error reports, could be a service start-up issue?


    Thanks,
  • edited June 2011 Member

    Hello Alex ,

    I can give you remote acces that you can see it,

    Pm me xxx@yyy

    Mod EDIT:

    Removed email address

  • After delete all files descriped  in url , everything works fine again.

    @Alex , after uninstalling stablebit using the dashbord
    the only files that was still on me machine were 
    C:\Program Files\Windows Server\Bin\DrivePool.Comm.dll
    and ofcoz the C:\ProgramData\StableBitDrivePool stuff



  • Member
    I can now confirm what Alex and Strammer_Max have recommended. After following the 'clean reinstall' instructions and manually deleting the 'C:\Program Files\Windows Server\Bin\DrivePool.Comm.dll' file, I was able to properly install the latest version and all of my data instantly reappeared.

    Thanks,
    -e.B
  • Hi Alex

     

    I have sent in all my error logs hope they help

     

    Lee

  • Covecube
    ...
    the only files that was still on me machine were 
    C:\Program Files\Windows Server\Bin\DrivePool.Comm.dll
    ...



    Ok, so that's the culprit.

    That file should not be there at all. It's a leftover from an old version.
  • Covecube

    Hi Alex

     I have sent in all my error logs hope they help Lee
    Got it. Replied in contact thread.
  • Covecube
    Just put out build 1914 that addresses this and a bunch of other reported issues:


    It will remove the old file if it's found.
  • Thanks Alex for the fast fix :-)

     

     

  • edited June 2011 Member

    Hi Alex

    I tried the new build 1914 and it did the same thing this was my process.

    Download 1914

    Install successful

    Reboot

    No drives in pool

    Reboot

    No drives in pool

    4 reboots later and the drives appear in the drive pool and all is well it generated 2 more error logs which I have forwarded you hope it helps.

    Maybe its some kind of  lag before drivepool rescans for the drives i dunno its just seems odd that after about 5 reboots like the previous version it picks the drivepool back up.

    Lee

     

     


     

  • Resident Guru
    Lee, is this a recurring issue on subsequent reboots or does it go away once the drives finally show up?
  • Covecube
    I'm talking to Lee in a support case, I think it's a separate issue not related to this thread.
  • I am now running the 1919 build on WHS 2011 dutch version. (updated from build 1864).
    I have the same issue. Due to some Windows updates I had to reboot the system and the drivepool was gone. After two reboots drives came up again.

    Equisetum
  • Also the same issue with build 1925
Sign In or Register to comment.