covecube.com
community.covecube.com
blog.covecube.com
wiki.covecube.com
bitflock.com
stablebit.com
In order to better support our growing community we've set up a new more powerful forum.
The new forum is at: http://community.covecube.com
The new forum is running IP.Board and will be our primary forum from now on.
This forum is being retired, but will remain online indefinitely in order to preserve its contents. This forum is now read only.
Thank you,
Download your copy of the StableBit DrivePool, StableBit Scanner or StableBit CloudDrive here
Follow Covecube on Twitter.rubenhak
About
- Username
- rubenhak
- Joined
- Visits
- 0
- Last Active
- Roles
- Member
Comments
-
I used to have 1.0.0.5536 before. Is there any installation log file available so I can take a look what is wrong?
-
disappointed, it was clear from the very beginning that DrivePool and DriveBender would get very similar feature sets. There are some glitches with DrivePool, and also it turned out that some decisions made on the core concepts used in the architect…
-
Agreed with Philmatic. I would just add: 5. Fixing temporary access denied issues caused when moving lots of files/folders around. and this should be good to go! As mentioned in earlier posts, yes I believe it should be fully retested. M4 sounds lik…
-
Johre, check my post above. My problem is solved. I mistakenly limited NIC card to utilize 100Mbps instead of 1Gbps. Not it is flying 90-100MB/s read and write.
-
Klode, thanks for telling to check the setup. It turned out that I mistakenly set 100MBps limit on my network card on the storage. It was the time when i wanted to set the link speed and duplex to "1GBps Full Duplex" but most probably did a mistake …
-
Klode, I'm actually using augmented Acer EasyStore H340, which now ASUS P8H61-I motherboard, Intel i3-2100T and 8GB DDR3 1600Mhz RAM under the hood. This thing is a hell lot more powerful than original system with crappy Atom CPU. On a system drive…
-
Alex, new UI looks perfect! Could you also provide some numbers to get a rough idea how will M4/Release version operate? Currently I'm getting 10-12 MB/s write and read performance on a wired Gigabit network. Running on i3-2100T CPU with plenty of m…
-
confirmed. now it works.!
-
Trying to configure Lights-Out and just want to consult what would be the best way to configure it. Should I mark DrivePool services to stop or restart whenever system goes into standby or wakes up respectively?
-
Looks like its working now. Still resetting permissions on shares. By any chance is there a way to reset permissions across all shares at once? Or we should reset one-by-one?
-
that's a good news!!! will it cleanup useless permission records as well?
-
Wow, that worked like a charm. However I had to reset some permissions, which was painful...
-
you mean just install the software, then plug in all the drives and wait for DrivePool to do its job? Should I add all drives at once, or just one bye one? Previously I already had some troubles with permissions, I think those are already sorted ou…
-
I used to reset NTFS permissions to have "Everyone" to have Full Control of entire disk drive and also made this setting to propagate all the way to descendants. Still can't think of a reason why can't some of the PCs/users connect to shares...
-
having same problem. some of the PCs in the network can access the pool and others cannot. What is even more weird is that on the same computer, one of user accounts can access pool shares and the other account could not. Everything is under home g…
-
Those are errors I seen in log file: DrivePool.Service.exe Warning 0 [FolderLinks] Error propagating security attributes. Insufficient system resources exist to complete the requested service 2011-07-27 07:00:56Z 2983015550778 DrivePool.Service.exe …
-
Yeah, those permissions are set properly but still cannot access any shares....
-
Check the permissions on the folders to make sure they got migrated properly. If not, just reset them. What's the error exactly? I checked share permission and those look like to be fine. Alex could you provide instructions of how to properly setup …
-
Alex, thank you for making this happen! However, I have some troubles. Immediately after upgrading to M3 I cannot access my shares from remote computer anymore. I see those shares, but I get an error when I try to open them. Tried a restart, but it …
-
Wow!! that's a good news that its released!! what kind of issues you got?
-
Alex, do you think you expose a feature to have an ability to scan entire pool/folder/file for consistency upon user request? This might be a good feature to keep your data safe. Otherwise your hdd can go bad, and your data can get corrupted without…
-
Alex, I got another question. Lets say I shutdown/restart the system. How does DrivePool determine healthy status of my pool? I mean by the time DrivePool was turned off, some of duplicated files could get deleted/damaged?Will DrivePool try to resca…
-
Alex, I understand that service was accessing the pool which introduces CPU consumption, that's totally normal, but I'm curious why does it access those files. I'm 100% positive that nothing I'm my network was accessing any on shares on the server. …
-
Alex, I understand that service was accessing the pool which introduces CPU consumption, that's totally normal, but I'm curious why does it access those files. I'm 100% positive that nothing I'm my network was accessing any on shares on the server. …
-
Alex, Can you explain the main workflow of DrivePool. I just logged in to my server and noticed excessive CPU consumption by DrivePool service. In ResourceMonitor I also noticed that it was accessing the pool contents. However those files were not …
-
Shane, those shares were freshly created with DrivePool but content I migrated from DE. However, any new file added to the share can bring it to unhealthy state. Just came across another problem. I was just copying 3-4GB files to the share, and the…
-
Alex, by any chance do you have any new progress with DrivePool?
-
I could successfully migrate DE to DP. However, I'm having little troubles with folder duplication. Every time i modify a duplicated file, the status of drive turn into "Unhealthy" state. "Recovery" process looks like fixes the problem (even though …
-
This guideline should be very useful. Thank you!I will use it once I receive my WHS 2011 CD and M3 gets released.
-
Thank you Shane for instructions. I'm just not very clear about step related to duplicated folders. Could you please elaborate more on this. In case of DE how do you know which file is original and which one is duplicated one?